{"id":3540,"date":"2026-10-09T11:15:53","date_gmt":"2026-10-09T03:15:53","guid":{"rendered":"http:\/\/www.jalalalhajabed.com\/blog\/?p=3540"},"modified":"2026-10-09T11:15:53","modified_gmt":"2026-10-09T03:15:53","slug":"are-resin-fridge-magnets-scratch-resistant-4f16-90c1ac","status":"publish","type":"post","link":"http:\/\/www.jalalalhajabed.com\/blog\/2026\/10\/09\/are-resin-fridge-magnets-scratch-resistant-4f16-90c1ac\/","title":{"rendered":"Are resin fridge magnets scratch – resistant?"},"content":{"rendered":"

Hey everyone! If you\u2019ve ever stopped scrolling through your phone at a kitchen store or clicked on a random Instagram reel about cute kitchen upgrades, you\u2019ve probably seen those resin fridge magnets everywhere. They\u2019re everywhere now\u2014bright, customizable, sometimes shaped like your favorite coffee mug or your pet\u2019s face, way more fun than those plain ceramic ones you got as a housewarming gift back in 2019. But here\u2019s the thing I get asked all day, every day: \u201cAre resin fridge magnets actually scratch-resistant? Because if I put one on my fridge, I don\u2019t want it ruining that stainless steel finish I paid way too much for.\u201d Resin Fridge Magnet<\/a><\/p>\n

<\/p>\n

Full transparency here\u2014 I\u2019ve been making and shipping these little resin guys to people all over the US for about four years now. Before I started this little side hustle (it\u2019s way less of a hustle now and more like a part of my kitchen counter routine, if I\u2019m being honest), I was in college doing materials science stuff. Not like, a PhD or anything\u2014just a random class I took because I needed a science credit to graduate. That random class is the reason I can answer this question without just saying \u201cthey\u2019re good, trust me.\u201d<\/p>\n

First, let\u2019s break down what resin fridge magnets are actually made of, because that\u2019s half the battle when it comes to scratching. Most of the good ones (the ones I sell, anyway) use epoxy resin\u2014wait, no, actually, there\u2019s two main types: epoxy and UV resin. I used to mix UV resin for quick orders, but I switched almost entirely to epoxy a couple years back after a bunch of customers said their UV ones chipped easier. Let me get specific, since I know no one wants the short version that\u2019s just \u201cresin is plastic.\u201d Epoxy resin (the kind I use) is a thermoset polymer\u2014meaning once it cures, it doesn\u2019t melt or soften when it gets warm, which is perfect for a fridge that\u2019s always slightly cold from the door being opened and closed. It\u2019s not the same as that cheap plastic toy you got as a kid that got all scuffed up after a month. That stuff is usually polystyrene, and it\u2019s way softer.<\/p>\n

Now, scratch resistance\u2014let\u2019s be real, nothing on this planet is 100% scratch-resistant, right? Even the fancy stainless steel fridges they brag about on TV get scuffed if you drag a metal pan across them, or if you accidentally drop a can of soup on it. So when people ask if our resin magnets are scratch-resistant, what they actually mean is: can they hold up to daily use without leaving marks on my fridge, or without the magnet itself getting all banged up?<\/p>\n

Let\u2019s talk about the magnet itself first, because that\u2019s the part touching your fridge. I used to buy random tiny magnets from a wholesale site years ago\u2014you know, the kind that\u2019s just a thin sheet of ferrite glued to the back. Those were garbage. After about three months, the glue would dry out, and the magnet would slide around, and sometimes it would leave little rust spots on the fridge? Gross. Now I use neodymium magnets\u2014rare earth magnets, yeah, but I get ones with a thin rubber coating around them. Wait, that\u2019s a big point I don\u2019t see a lot of other sellers mention. The rubber coating isn\u2019t just to keep the magnet from scratching the fridge. It\u2019s also to stop the magnet from scuffing the resin back, because the last thing you want is a cute magnet that gets all scratched up itself.<\/p>\n

I test every batch before I ship it out, for the whole scratch thing. Not like, fancy lab tests (though I do have that old materials science textbook sitting on my shelf, so I\u2019m not totally winging it). Simple, real-life tests. I take a metal butter knife\u2014something that\u2019s not super sharp, but not dull either\u2014and I drag it across the top of a finished resin magnet with moderate pressure. If it leaves a mark, that batch gets sent back. Wait, but I\u2019ll be honest: a sharp, metal butter knife will leave a mark on almost anything if you try hard enough. I\u2019ve tested that too. I had a customer once email me saying their magnet got scratched when they dragged a heavy metal pot across it. Duh\u2014you\u2019re dragging a pot across a tiny plastic thing? Of course that\u2019s going to leave a mark. I explained that, and they got it\u2014turns out they were just being careless, and the magnet was totally fine for regular use.<\/p>\n

Another test I do: I rub the magnet against the fridge door, back and forth, like I\u2019m scraping a piece of crusted cheese off it (relatable, right?). No marks. I\u2019ve also dropped magnets from counter height onto my tile floor\u2014they don\u2019t chip, they don\u2019t scratch, they just bounce a little and land. I\u2019ve had customers leave reviews saying their magnet has been on their fridge for two years, and it looks exactly the same as the day they got it. That\u2019s the real test, not my random kitchen experiments.<\/p>\n

But wait, let\u2019s get into the factors that affect scratch resistance, because it\u2019s not all just \u201cresin is good.\u201d First, the curing time. If you don\u2019t cure resin long enough, it\u2019s soft\u2014like, you can dent it with your nail if you push hard. I see a lot of cheap sellers on Etsy that only cure their resin for 24 hours because they have 50 orders to ship that day. I cure mine for 72 hours minimum. That extra two days makes a huge difference. Curing is when the resin hardens completely, so if you cut that time short, it\u2019s way more prone to scratching. I used to cut corners when I first started\u2014just to get orders out on time\u2014and I had a whole batch of magnets come back with little scuffs on the sides. Never again.<\/p>\n

Then there\u2019s the thickness. If your resin magnet is only 1\/8 of an inch thick, it\u2019s way more likely to scratch than one that\u2019s 1\/4 inch. That\u2019s why I make all mine at least 3\/16 of an inch thick. The thicker the resin, the more solid it is, and the less likely it is to get a scratch. I know people like thin magnets because they don\u2019t stick out as much, but if you want scratch-resistant, thicker is better. It\u2019s a trade-off, but worth it, in my opinion.<\/p>\n

Also, what you put inside the resin matters. I put a lot of little things inside mine\u2014coffee grounds, tiny pressed flowers, little bits of glitter, even custom photos for people\u2019s pet faces. If you\u2019re putting in something hard, like a metal charm, that can scratch the resin from the inside if it\u2019s not sealed properly. That\u2019s another reason I seal every magnet with a top coat of epoxy, not just a thin layer. The top coat acts like a protective layer on top of all the stuff inside. I use UV-resistant top coat too, which stops the resin from yellowing over time (another complaint I get a lot!) and also makes it even harder to scratch.<\/p>\n

Wait, let\u2019s address the big myth I see online all the time: \u201cResin scratches easily, and you have to use special cleaners to fix scratches.\u201d That\u2019s only true if you let the scratch get bad, or if you\u2019re using the wrong resin. If you get a light scratch on your resin fridge magnet, especially if it\u2019s on the top coat, you can usually buff it out with a little bit of rubbing alcohol and a soft cloth. I\u2019ve done that to a test magnet I\u2019ve had on my own fridge for two years. It had a tiny scratch from a fork slipping when I was grabbing butter. A quick rub with a paper towel dipped in rubbing alcohol, and it\u2019s gone. No one would ever know it was there. If it\u2019s a deeper scratch, you can even buff it with a tiny bit of car wax, which works great. I don\u2019t sell car wax, obviously, but it\u2019s a trick I picked up from a fellow resin maker at a craft fair last year.<\/p>\n

Now, what about different types of fridges? I get asked this a lot too. If you have a stainless steel fridge, will resin magnets scratch it? Like I said earlier, I use magnets with rubber coatings, so no, you won\u2019t get marks. The rubber is soft, so even if you drag the magnet a little, it won\u2019t scratch the steel. If you have a black fridge, sometimes people worry about marks showing up, but the same thing applies\u2014rubber coated magnets are safe. I have a black fridge in my own kitchen, and I\u2019ve had magnets on it for years, no marks at all. I will say, if you have a really cheap fridge, like the kind you get from a discount store, sometimes the paint is really thin, so you might get a little mark if you yank the magnet off hard. But that\u2019s not the resin\u2019s fault\u2014that\u2019s the fridge\u2019s finish.<\/p>\n

Let me also talk about what resin magnets can\u2019t handle, because it\u2019s only fair. If you use a metal scrubber to clean your fridge, obviously that\u2019s going to scratch anything. If you hang a heavy object from the magnet (I\u2019ve seen people hang their keys from it, which is way too much weight, by the way), that can pull the magnet loose, and when it slides, it might leave a mark. If you leave the magnet in direct sunlight for hours every single day, the resin might get a little soft, which would make it more prone to scratching. But that\u2019s not daily use\u2014that\u2019s putting a magnet in a window sill where it gets sun all day. Just put them on your fridge, like they\u2019re supposed to be.<\/p>\n

I also did a little experiment with a customer who emailed me last month saying their new magnet got scratched. They sent me a photo, and it was a tiny scratch right where the magnet touched the edge of their fridge door when they closed it. Oh, that\u2019s a common one! When you close the fridge, if the magnet is sticking out too far, it can rub against the frame and leave a little mark. That\u2019s not the resin being bad\u2014that\u2019s just where they put it. I\u2019ve started putting a little note in every order that says \u201ctry to place your magnets at least an inch away from the fridge door edge to avoid this!\u201d It\u2019s saved me so many follow-up emails.<\/p>\n

So, to wrap this up, are resin fridge magnets scratch-resistant? The short, real answer is: they\u2019re way more scratch-resistant than the cheap ceramic or plastic ones you\u2019ve used before, as long as you get a good one (not the $1 ones on Amazon that take two weeks to ship). The ones I make? We test every single one, use thick epoxy, rubber coated neodymium magnets, cure them properly, and seal them with a UV-resistant top coat. They can hold up to the daily grind of a kitchen\u2014rubbing against the fridge door, being bumped when you\u2019re grabbing a soda, even light drags with a kitchen utensil. The only way they\u2019ll get scratched is if you do something crazy, like drag a heavy metal pan across them, or leave them in direct sun all day, or use a metal scrubber on your fridge with them attached.<\/p>\n

<\/p>\n

If you\u2019re looking for custom resin fridge magnets for your own kitchen, or to sell in your store, I make bulk orders too. Just reach out anytime to talk about what you need. I\u2019m here to help, not just sell you a product.<\/p>\n

Resin Ornament<\/a> References<\/p>\n

    \n
  1. Polymer Science Learning Center. (n.d.). Thermoset Polymers. University of Massachusetts Amherst.<\/li>\n
  2. The Resin Artist\u2019s Handbook. (2022). Epoxy Curing Guidelines for Makers.<\/li>\n
  3. Neodymium Magnet Association. (2021). Coated Magnets for Surface Protection.<\/li>\n
  4. Journal of Applied Polymer Science. (2020). Scratch Resistance of Cured Epoxy Resins.<\/li>\n<\/ol>\n
    \n

    Shengzhou Shengteng Accessories Co., Ltd.<\/a>
    With abundant experience, we are one of the most professional resin fridge magnet manufacturers and suppliers in China. We warmly welcome you to wholesale customized resin fridge magnet at competitive price from our factory. For free sample, contact us now.
    Address: Room 701, Building 23, Wanyang Innovation City, No. 368 Kaiya Road, Changle Town, Shengzhou City, Shaoxing City, Zhejiang Province
    E-mail: 15869252296@163.com
    WebSite:     https:\/\/www.shengtengjewelry.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey everyone! If you\u2019ve ever stopped scrolling through your phone at a kitchen store or clicked … Are resin fridge magnets scratch – resistant?<\/span>Read more<\/a><\/p>\n","protected":false},"author":515,"featured_media":3540,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3503],"class_list":["post-3540","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-resin-fridge-magnet-422d-910921"],"_links":{"self":[{"href":"http:\/\/www.jalalalhajabed.com\/blog\/wp-json\/wp\/v2\/posts\/3540","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.jalalalhajabed.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.jalalalhajabed.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.jalalalhajabed.com\/blog\/wp-json\/wp\/v2\/users\/515"}],"replies":[{"embeddable":true,"href":"http:\/\/www.jalalalhajabed.com\/blog\/wp-json\/wp\/v2\/comments?post=3540"}],"version-history":[{"count":0,"href":"http:\/\/www.jalalalhajabed.com\/blog\/wp-json\/wp\/v2\/posts\/3540\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.jalalalhajabed.com\/blog\/wp-json\/wp\/v2\/posts\/3540"}],"wp:attachment":[{"href":"http:\/\/www.jalalalhajabed.com\/blog\/wp-json\/wp\/v2\/media?parent=3540"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.jalalalhajabed.com\/blog\/wp-json\/wp\/v2\/categories?post=3540"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.jalalalhajabed.com\/blog\/wp-json\/wp\/v2\/tags?post=3540"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}